Amacan K Submersible pump in discharge tube

Submersible pump in discharge tube Amacan K

Wet-installed submersible motor pump for installation in discharge tubes, with channel impeller, single-stage, single-entry. ATEX-compliant version available.
See all documents and downloads

Main Applications

  • Irrigation pumping stations
  • Drainage pumping stations
  • Stormwater pumping stations
  • Water pollution control

Technical Data

Maximum flow rate TSG
7200 m3/h
Maximum head TSG
30 m
Max allow ds work.pressure TSG
16 bar
Max allowed fluid temp TSG
40 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact


Your KSB contact : We’re here to support you

Benefits

  • Three-phase motor and optimum motor cooling by fluid handled make for efficient power utilisation.
  • The pump’s own weight ensures self-centring seating in the discharge tube, and an O-ring seals it; quick to install or remove.
  • The slim motor minimises discharge tube flow losses.

Technical Data

Component function
Pump
Connection type Inlet
without
Drive concept
With electric actuator
Maximum flow rate TSG
7200 m3/h
Minimum flow rate TSG
0.1 m3/h
Maximum head TSG
30 m
Minimum head TSG
0.1 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
380 V,
400 V,
690 V
Mtrl Hydraulic casing
EN-GJL-250
Nominal pressure Outlet
PN 16
Max allow ds work.pressure TSG
16 bar
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
40 °C
Min allowed fluid temp TSG
2 °C

Sectional Drawings