Etaline Z Dry-installed pump

Dry-installed pump Etaline Z

Single-stage volute casing pump in in-line design as twin pump, with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system; pump shaft and motor shaft are rigidly connected. An M12 module (accessory) enables redundant operation of Etaline Z without the need for a higher-level controller. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
See all documents and downloads

Main Applications

  • Service water supply systems
  • Heating systems
  • Industrial recirculation systems
  • Air-conditioning systems

Technical Data

Maximum flow rate TSG
1095 m3/h
Maximum head TSG
38 m
Max allow ds work.pressure TSG
16 bar
Max allowed fluid temp TSG
140 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact


Your KSB contact : We’re here to support you

Benefits

  • Maximum energy efficiency through demand-driven operation in combination with KSB SuPremE IE4/IE5 motorMotor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets. to IEC TS 60034-30-2:2016
  • PumpDrive 2 / PumpDrive 2 Eco perfectly matched to pump and motor by default factory parameter settings
  • Motor-mounted variable speed system up to 45 kW saves space

Technical Data

Component function
Pump
Connection type Inlet
Flange
Drive concept
With electric actuator
Maximum flow rate TSG
1095 m3/h
Minimum flow rate TSG
1 m3/h
Maximum head TSG
38 m
Minimum head TSG
1 m
Mains frequency
50 Hz
Mains voltage
400 V
Nominal pressure Outlet
PN 16
Max allow ds work.pressure TSG
16 bar
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
140 °C
Min allowed fluid temp TSG
-30 °C

Sectional Drawings